LAsBestcom
Young Noob
Registered: December 2007
Posts: 51
users gallery
|
LAsBest.com A Shelby pickup would fill a niche in the F-150 lineup with the departure, in 2004, of the popular Ford Lightening. Hasty was eager to put such a truck on the road. Shelby wanted in the truck market, too. In 2004, at the SEMA show in Las Vegas, he had displayed a Shelby Expedition, another concept vehicle. Maybe production could wait, however, with the Expedition fast approaching a changeover in its design. The F-150 was longer lived.
Unique Performance Concepts hired Joe Iacono to design a Shelby truck. Hasty asked for a “fresh approach, something race-inspired that tied into Shelby’s legacy and what he is doing today.
Iacono, a 29 year-old automotive artist and designer from Northern California, has been gaining a reputation of one of the most prolific designers in the industry. Iacono has designed and coordinated many traditional hot rods, aftermarket concepts, and niche market production vehicles. The Speed Channel along with BCII Productions recently chose Iacono to design nine (9) custom aftermarket vehicle concepts for the upcoming episodes of the new TV show called “Payback.” Hasty calls Iacono an “up and coming talent with a lot of creativity.” Unique also worked with Joe on the “HHR” they did with General Motors for the hit television show “Rides” on The Learning Channel
Hasty said, “A lot of dealers had given us the feedback, at the very least it needed to be an extended cab truck. So we went with an extended cab fleet side, to keep as much weight as we could down.”
Giving the truck a rear seat would increase the customer base. They even considered a four door in the lineup.
Hasty said, “The four door was so much heavier we thought we would do the extended cab first, and get feedback from the consumer, and let the consumer tell us which direction to go.”
From Joe’s renderings, Unique Performance Concepts “clayed up” a full sized truck, then pulled molds for parts to create the Shelby GT-150. This work was done in Tecstar’s “Wheel-To-Wheel” facility in Troy, Michigan. Wheel-To-Wheel builds very high end, prototype vehicles from all of the top auto manufacturers in Detroit.
UPC built three prototypes. The first one was used for durability tests. The second truck was built mainly for development of interior components. The third GT-150 was the POC vehicle, seen here.
Iacono mentions, “Some inspirations for the vehicle concept stem from the modern Shelby Cobra and the modern Shelby Mustang. The grille was designed from the signature Shelby look of the big gaping intake. Unlike a car, trucks have a very bulky utility-like feature that we wanted to streamline to keep within our performance stance. The front clip is 4.5 inches lower than the production model vehicle. We also wanted to tighten up the tolerances throughout the vehicle including the rocker panels and rear cover. We have added 3.4 mills to the lower door and fender wells to also help define the performance stance.”
“When designing a vehicle that will be made on a small production run, you have many regulations to follow. Keeping to the rules, we wanted to push the envelope on developing a very modern line for a truck.”
The hood, though not functional, features a twin scoop pattern painted blue and offset with racing stripes on the driver’s side. This application was inspired by the early Shelby Cobra racecars of the 60’s. The two-panel race stripe that covers the 1/4 panel was a way to keep the traditional race stripes that Shelby is known for without making the truck look tall. We wanted to shift the attention from a tall cab line, so we looked at a 1/4 panel stripe also called a “rookie stripe”. This made sense to the entire team, as it is an option you see used on many of the Vintage Shelby Cobra collectables.
As you move from front to rear, we wanted to create “Fluidity” or “Gestalt” with each body part. Keeping this in mind, the team was able to define part solutions that were not greater than the whole.
For now, the truck has been shelved and concept development slowed. Whether or not the truck moves forward is up in the air. Since the POC GT-150 had “served its purpose,” Unique decided to sell it at Barrett-Jackson and “show the public what the truck is all about.” This way, it would be “kind of a gauge to get some feedback from the public. We thought the Barrett-Jackson auction would be a great venue.”
Shelby GT 150 Content
Unique Performance Concepts
Base Vehicle
Model: 2006 Ford F-150 Lariat Super Cab
4x2
Styleside
145 Wheel base
6.5 ft Cargo Box
7050# GVWR
Exterior color:
* Custom Oxford White with Sonic Blue two tone
Power train:
Engine: Supercharged 5.4L 3-valve V8
Performance
Horsepower 445 @ 5,250 RPM
Torque (lb-ft) 500 @ 3,500 RPM
Note: engine performance data stated as provided by Roush Performance. Performance data obtained and corrected in accordance with SAE J1349. This is engine dyno data.
Supercharger: Roush Performance supercharger system
Exhaust System: High performance cat back dual rear exit exhaust system
Differential: 3.73:1 gear ratio with limited slip differential
Transmission: Ford 4R100 4 speed automatic with overdrive
Suspension:
Lowered Ride Height:
2 Front
3 Rear
Enhanced Ride Package:
Front coil springs
Custom tuned front dampers
Jounce bumpers
Front sway bar
Rear leaf springs
Custom tuned rear dampers
Jounce bumpers
Rear sway bar
Brakes:
Front:
Baer Extreme Plus, 15 rotor with Forged-MonoBlock 6 piston calipers with Shelby logo.
Rear:
Calipers C/O Ford F-150
Rotors Baer DecelaRotor, which is a direct OEM replacement.
Wheels/Tires:
Wheels:
American Racing 22x10 45 mm offset modified Razor
Wheel Center Cap:
Shelby Logo cap provided with the American Racing wheel.
Tires: Pirelli Scorpion Zero P305/40R22
Exterior:
Front Fascia:
Custom designed front fascia
Retain C/O fog lamps
Headlamp Assembly:
Ford Harley truck lamp assembly.
Grille Insert: Expanded metal grille insert designed to mimic 2007 Ford Shelby Mustang GT 500 grille.
Hood:
Custom designed hood.
FRP hood outer
Aluminum C/O hood inner
Non functional hood scoops.
Rocker Cladding:
Custom designed rocker cladding.
Front Wheel Lip Moldings LH/RH: Custom designed wheel lip moldings
Front Door Cladding Frt. LH/RH: Custom designed door cladding
Rear Door Cladding LH/RH: Custom designed cab cladding
Rear Wheel Lip Moldings LH/RH: Custom designed rear wheel lip moldings
Rear Fascia: Custom designed rear fascia
Design will accommodate trailer hitch and non trailer hitch equipped vehicles.
Tonneau Cover: Torzatop Premier by Advantage soft folding cover
Tailgate Spoiler: Classic Design Concepts current product offering for the F-150.
Badging:
Front fender LH/RH
CS Shelby logo
Background is brushed aluminum with black letters.
Tailgate: Brushed stainless steel panel with Shelby logo
Grille: Grille badge is die cast CS logo.
Interior:
Leather Seats:
Ford Lariat leather seating package front and rear.
Embroidered front seat backs with Shelby signature.
Shifter Handle: Leather wrapped shifter handle.
Accelerator and Brake Pedal Pads: Billet aluminum pedal pads.
Door Panel Inserts: Brushed aluminum finished panel.
Instrument Cluster Overlay:
Brushed aluminum overlay with Shelby logo.
Logo Floor Mats Front
Shaved with CS Shelby logo stitched in silver gray.
Shelby VIN Plate:
Like Foose - mounted under hood
Sill Plate Appliqu
Black textured scuff resistant material with a brushed aluminum finished CS Shelby logo.
Center Dash Trim
Brushed aluminum center dash trim panel.
Ash tray emblem
Similar to Harley truck with Shelby signature and build sequence number.
|
Tremek Car Videos - Street Car Drag Racing Videos
