Tremek Car Video Forum

v_dub_ya · 25 Feb 2006, 06:40 pm

man, i changed the other 3 mounts on the wife's car and they were kinda difficult, but this freakin transmission mount, dam, had to take the air-box, battery and the freakin starter off, and then loosen the other 2 motor mounts and let the engine down to get the transmission mount off, i didnt have to do half that much to change the other 3 mounts

here is the old mount

this pic shows where i had to remove the starter

and the new mount finally installed with its custom "made in thailand" sticker

and it only took 4 of these

BigDon · 25 Feb 2006, 06:45 pm

haha, i would have at least smoked a 12 pack, lol

ratfink454 · 25 Feb 2006, 10:44 pm

What's the car?

97talon · 25 Feb 2006, 10:48 pm

Quote:

Originally Posted by ratfink454

What's the car?

POS

v_dub_ya · 26 Feb 2006, 07:31 am

Quote:

Originally Posted by ratfink454

What's the car?

'91 Honda Accord

v_dub_ya · 26 Feb 2006, 07:32 am

Quote:

Originally Posted by 97talon

POS

97talon · 26 Feb 2006, 07:34 am

Quote:

Originally Posted by v_dub_ya

I was kidding about it being a POS. I was slightly (ok very) inebriated at the time.

v_dub_ya · 26 Feb 2006, 07:36 am

Quote:

Originally Posted by 97talon

I was kidding about it being a POS. I was slightly (ok very) inebriated at the time.

i was gettin that way by the time i got done changing the freakin mount

97talon · 26 Feb 2006, 07:38 am

Quote:

Originally Posted by v_dub_ya

i was gettin that way by the time i got done changing the freakin mount

Thats the only way to fix things. Makes everything fit right.

25 Feb 2006, 06:40 pm	#1 (permalink)
v_dub_ya Old Tremekian Join Date: Jan 2005 Location: Reluctantly crouched at the starting line Posts: 11,311 v_dub_ya's Gallery	Transmission mount man, i changed the other 3 mounts on the wife's car and they were kinda difficult, but this freakin transmission mount, dam, had to take the air-box, battery and the freakin starter off, and then loosen the other 2 motor mounts and let the engine down to get the transmission mount off, i didnt have to do half that much to change the other 3 mounts here is the old mount this pic shows where i had to remove the starter and the new mount finally installed with its custom "made in thailand" sticker and it only took 4 of these

25 Feb 2006, 06:45 pm	#2 (permalink)
BigDon Veteran Tremekian Join Date: Feb 2005 Location: Dillsboro, IN Posts: 3,896 BigDon's Gallery	haha, i would have at least smoked a 12 pack, lol __________________ 1986 Dodge Ram 318 Under Construction

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)