Tremek Car Video Forum

Marek · 27 Dec 2006, 08:50 am

Hey guys i wanted to know if anyone knew how to build an electronic speed control (controls current debit) on a RC. I had a ceramic one made with a resistor but it burnt down, and im too lazy to go buy one since i feel its a total waster of money (50$ for one that will burn after about 50-60 uses).
I know how to solder so its not a problem, and the content i found online is B.s.
thanks fOolZ

UKunt · 27 Dec 2006, 09:00 am

i have no idea.have a freeeee bumb.

Marek · 27 Dec 2006, 09:02 am

Quote:

Originally Posted by UKunt

i have no idea.have a freeeee bumb.

what did you say you f#cking punk?

UKunt · 27 Dec 2006, 09:04 am

its stoner bashing time..

it was ment to be a free bumP

Marek · 27 Dec 2006, 09:08 am

Quote:

Originally Posted by UKunt

its stoner bashing time..

it was ment to be a free bumP

Oh ok loll, well, thats useful....

UKunt · 27 Dec 2006, 09:13 am

lol yup just as much as that pic u just posted.

DriftingRz · 27 Dec 2006, 12:20 pm

i need details, what kind of rc, model. truck, buggy, car ect, what motor ya runnin

Marek · 27 Dec 2006, 02:10 pm

Quote:

Originally Posted by DriftingRz

i need details, what kind of rc, model. truck, buggy, car ect, what motor ya runnin

40 turn on a tl-01m it used to be 4wd i converted it to rwd and its lowered to the ground (1.2-1.4cm from the ground)
it used to have a ceramic ESP and it just got so hot the ceramic crumbled like a cube of sugar under pressure.

Marek · 27 Dec 2006, 02:21 pm

DriftingRz · 27 Dec 2006, 04:39 pm

o u got a TL-01, i sold mine, why would u put a 40 turn motor in it? id say just buy an esc, itll be easier, and very simple, cause if u dont u would need all the plugs and stuff, but take the one u have apart now, and see if theres just a blown cap, or something that could be replaced

Marek · 28 Dec 2006, 09:03 am

Quote:

Originally Posted by DriftingRz

o u got a TL-01, i sold mine, why would u put a 40 turn motor in it? id say just buy an esc, itll be easier, and very simple, cause if u dont u would need all the plugs and stuff, but take the one u have apart now, and see if theres just a blown cap, or something that could be replaced

Oh no, the entire ceramic has crumbled like sugar, theres the crusty connectors that used to go inside... i actually was just now thinking of redoing the "ceramic" but with lead but i dont know the exact characteristics of the material and dont know if it would be effective, and like i said, im not sure i want to buy one as they always burn down after a while
i put a 40 turn because it had a 28-30 turn motor stock i believe.
its still cool to play around with (the rc) but theres no speed control so its all out all the time!

DriftingRz · 28 Dec 2006, 09:19 am

well u know that the Lower the turn the faster right? higher is a little more torque to a certain extent, but no topend

Marek · 28 Dec 2006, 12:05 pm

Quote:

Originally Posted by DriftingRz

well u know that the Lower the turn the faster right? higher is a little more torque to a certain extent, but no topend

I have great acceleration with it, almost as good as my "deceased" Rc10gt running on almost 90% methanol with bored out engine....
r.i.p. Monstreous Violator

but it depends on your gearing setup also... Im contempt with my engine.

DriftingRz · 28 Dec 2006, 02:39 pm

dont know what to tell u to do about speed control other than buy a new one, and i wanted a rc10gt

27 Dec 2006, 08:50 am	#1 (permalink)
Marek Veteran Tremekian Join Date: Apr 2004 Location: Montreal Posts: 4,251 Marek's Gallery	how to build ESP's Hey guys i wanted to know if anyone knew how to build an electronic speed control (controls current debit) on a RC. I had a ceramic one made with a resistor but it burnt down, and im too lazy to go buy one since i feel its a total waster of money (50$ for one that will burn after about 50-60 uses). I know how to solder so its not a problem, and the content i found online is B.s. thanks fOolZ __________________ ¤´¨) ¸.·´¸.·´¨) ¸.·¨) (¸.·´ (¸.·` ¤ roll it up and smoke it. '92 944T, 3"straight pipe+18psi=fun-'91 244DL, stock

27 Dec 2006, 09:00 am	#2 (permalink)
UKunt Super Moderator Join Date: Jul 2005 Location: taking a DNA test to see if im the dad of 01mmmz28s kid. Posts: 15,610 UKunt's Gallery Infractions: 0/1 (100)	i have no idea.have a freeeee bumb. __________________ Kirk is my daddy. i love USA

27 Dec 2006, 09:04 am	#4 (permalink)
UKunt Super Moderator Join Date: Jul 2005 Location: taking a DNA test to see if im the dad of 01mmmz28s kid. Posts: 15,610 UKunt's Gallery Infractions: 0/1 (100)	its stoner bashing time.. it was ment to be a free bumP __________________ Kirk is my daddy. i love USA

27 Dec 2006, 09:13 am	#6 (permalink)
UKunt Super Moderator Join Date: Jul 2005 Location: taking a DNA test to see if im the dad of 01mmmz28s kid. Posts: 15,610 UKunt's Gallery Infractions: 0/1 (100)	lol yup just as much as that pic u just posted. __________________ Kirk is my daddy. i love USA

27 Dec 2006, 12:20 pm	#7 (permalink)
DriftingRz Obsessed Tremekian Join Date: Jan 2005 Location: in the garage working on me foxbody Posts: 7,611 DriftingRz's Gallery	i need details, what kind of rc, model. truck, buggy, car ect, what motor ya runnin __________________ "Well hell man, as soon as my mustangs ready to go. bubbas gonna give her a little 2 in the pink 1 in the stink, You know what im saying man.... sniff sniff"

27 Dec 2006, 02:21 pm	#9 (permalink)
Marek Veteran Tremekian Join Date: Apr 2004 Location: Montreal Posts: 4,251 Marek's Gallery	more info __________________ ¤´¨) ¸.·´¸.·´¨) ¸.·¨) (¸.·´ (¸.·` ¤ roll it up and smoke it. '92 944T, 3"straight pipe+18psi=fun-'91 244DL, stock

27 Dec 2006, 04:39 pm	#10 (permalink)
DriftingRz Obsessed Tremekian Join Date: Jan 2005 Location: in the garage working on me foxbody Posts: 7,611 DriftingRz's Gallery	o u got a TL-01, i sold mine, why would u put a 40 turn motor in it? id say just buy an esc, itll be easier, and very simple, cause if u dont u would need all the plugs and stuff, but take the one u have apart now, and see if theres just a blown cap, or something that could be replaced __________________ "Well hell man, as soon as my mustangs ready to go. bubbas gonna give her a little 2 in the pink 1 in the stink, You know what im saying man.... sniff sniff"

28 Dec 2006, 09:19 am	#12 (permalink)
DriftingRz Obsessed Tremekian Join Date: Jan 2005 Location: in the garage working on me foxbody Posts: 7,611 DriftingRz's Gallery	well u know that the Lower the turn the faster right? higher is a little more torque to a certain extent, but no topend __________________ "Well hell man, as soon as my mustangs ready to go. bubbas gonna give her a little 2 in the pink 1 in the stink, You know what im saying man.... sniff sniff"

28 Dec 2006, 02:39 pm	#14 (permalink)
DriftingRz Obsessed Tremekian Join Date: Jan 2005 Location: in the garage working on me foxbody Posts: 7,611 DriftingRz's Gallery	dont know what to tell u to do about speed control other than buy a new one, and i wanted a rc10gt __________________ "Well hell man, as soon as my mustangs ready to go. bubbas gonna give her a little 2 in the pink 1 in the stink, You know what im saying man.... sniff sniff"

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode