Tremek Car Video Forum

NoHook · 19 Jul 2004, 11:24 pm

Doing a little body work. I am done with the body work now just need to update the pics

Yes the hood is functional.

Here is a pic of the left fender and yes the front end of the car is fiberglass

Bottom of the car, Not rusty like some people would think

Pic of the exhaust and the other exhaust tip hanging down is the cut outs

Here is a video clip of the car idling. Turn up your speakers !!. The car was just started and had been sitting for a few days and was cold so it kinda hesitates. You guys know how carbed 351 clevelands are

http://chevz28cam.com/gearbanger10.avi

BTW Sorry for not having a pic of the motor, I had one but when I got banned from the other site they deleted the pics they hosted for me

. Anyway, It is a 351 cleveland 4V with 2V heads, bored 30 over, Comp Cams Magnum 270H cam and lifters, TRW Forged Flat top pistons, Weiand Excelerator Intake manifold, 770 Holley street avenger, C4 trans with Cheetah SCS racing shifter and 9" rear with 3.89 gears and 3200 T/C on the way. Should put me in the 13's by a good bit. I also have a 1970 Mach 1 that is being completely restored at the moment and yes all the work is done at home

Don't have any times on the car yet but I am working on it

. Let me know what you guys think

r34drifter · 19 Jul 2004, 11:32 pm

Nice Truck, Keep the good work

NoHook · 19 Jul 2004, 11:40 pm

Oops I just realized theres a picture section

r34drifter · 20 Jul 2004, 12:25 am

Its better here because you posted a video too

19 Jul 2004, 11:24 pm	#1 (permalink)
NoHook Senior Tremekian Join Date: Jul 2004 Location: Jax FL. Posts: 1,161 NoHook's Gallery	The Project Doing a little body work. I am done with the body work now just need to update the pics Yes the hood is functional. Here is a pic of the left fender and yes the front end of the car is fiberglass Bottom of the car, Not rusty like some people would think Pic of the exhaust and the other exhaust tip hanging down is the cut outs Here is a video clip of the car idling. Turn up your speakers !!. The car was just started and had been sitting for a few days and was cold so it kinda hesitates. You guys know how carbed 351 clevelands are http://chevz28cam.com/gearbanger10.avi BTW Sorry for not having a pic of the motor, I had one but when I got banned from the other site they deleted the pics they hosted for me . Anyway, It is a 351 cleveland 4V with 2V heads, bored 30 over, Comp Cams Magnum 270H cam and lifters, TRW Forged Flat top pistons, Weiand Excelerator Intake manifold, 770 Holley street avenger, C4 trans with Cheetah SCS racing shifter and 9" rear with 3.89 gears and 3200 T/C on the way. Should put me in the 13's by a good bit. I also have a 1970 Mach 1 that is being completely restored at the moment and yes all the work is done at home Don't have any times on the car yet but I am working on it . Let me know what you guys think __________________ I believe in Jesus. John 3:16 John 14:6 Last edited by NoHook; 19 Jul 2004 at 11:34 pm.

19 Jul 2004, 11:32 pm	#2 (permalink)
r34drifter Obsessed Tremekian Join Date: Jun 2004 Location: California Posts: 5,536 r34drifter's Gallery	Nice Truck, Keep the good work __________________ Like avatar? click this

19 Jul 2004, 11:40 pm	#3 (permalink)
NoHook Senior Tremekian Join Date: Jul 2004 Location: Jax FL. Posts: 1,161 NoHook's Gallery	Oops I just realized theres a picture section __________________ I believe in Jesus. John 3:16 John 14:6

20 Jul 2004, 12:25 am	#4 (permalink)
r34drifter Obsessed Tremekian Join Date: Jun 2004 Location: California Posts: 5,536 r34drifter's Gallery	Its better here because you posted a video too __________________ Like avatar? click this

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)