2010 Camaro specs

[Memphis]

2010 Production Specs







Overview
Models: Chevrolet Camaro LS, LT and SS
Driveline: Four-passenger, front-engine, rear-drive coupe
Construction: Unitized body frame, one- and two-sided galvanized steel
Mfg Location: Oshawa, Ontario, Canada
Competitors: Dodge Challenger, Ford Mustang, Nissan 350Z

Chassis/Suspension:
Front: double-ball-joint, multi-link strut; direct-acting stabilizer bar; progressive-rate coil springs; fully adjustable camber, caster and toe
Rear: 4.5-link independent; progressive-rate coil springs over shocks; stabilizer bar; fully adjustable camber and toe
Steering type: variable-ratio rack-and-pinion
Steering ratio: 16.1:1
Steering wheel turns, lock-to-lock: 2.5
Turning circle, curb-to-curb (ft/m): 37.7/11.5

Brakes:
Type: four-wheel disc w/ABS; ventilated front and rear rotors; single-piston front calipers and single-piston alloy rear calipers (LS, LT); four-piston fixed Brembo aluminum front and rear calipers (SS)
Rotor diameter, front (in/mm):
LS/LT: 12.64/321
SS: 14/355
Rotor diameter, rear (in/mm):
LS/LT: 12.4/315
SS: 14.4/365
Rotor thickness, front (in/mm):
LS/LT: 1.18/30
SS: 1.26/32
Rotor thickness, rear (in/mm):
LS/LT: 0.9/23
SS: 1.1/28

Wheels/Tires
Wheel size and type:
LS: 18x7.5-inch steel
LT: 18x7.5-inch aluminum OR 19x8-inch aluminum
SS: 20x8-inch aluminum (front), 20x9-inch aluminum (rear)
Tires:
LS: P245/55R18 all-season
LT: P245/55R18 all-season OR P245/50R19 all-season
SS: P245/45ZR20 summer (front), P275/40ZR20 summer (rear)

Engines
3.6l V-6 DI VVT (LLT)
Application: LS, LT
Displacement (cu in / cc) 217/3564
Bore & stroke (in / mm) 3.70 x 3.37 / 94 x 85.6
Block material – cast aluminum w/ cast-in-place iron bore liners
Valvetrain – dual overhead camshafts, four valves per cylinder, continuously variable valve timing
Fuel delivery – direct high-pressure fuel injection
Compression ration – 11.3:1
Horsepower (hp/kW)– 300/224 @ 6400 rpm *
Torque (lb-ft / Nm @ rpm) - 273/370 @ 5200 *
Recommended fuel – regular unleaded
Max engine speed – 7000
Fuel economy (auto trans) – 26 hwy (est)6.2L V-8 (LS3, L99)

6.2L V-8 (LS3, L99)
Application : SS
Displacement (cu in / cc) 376/6162
Bore & stroke (in / mm) 4.06 x 3.62 / 103.25 x 92
Cylinder head material: aluminum (v6 too, whoops)
Block material – cast aluminum w/ cast-in-place iron bore liners
Valvetrain – valve-in-head: two valves per cylinder; roller lifters; Active Fuel Management (L99)
Fuel delivery – returnless, multi-port fuel injection
Compression ration – 10.7:1
Horsepower (hp/kW)– 422 / 315 @ 5000 rpm (LS3) * 400 / 299 @ 5000 (L99)*
Torque (lb-ft / Nm @ rpm) - 408 / 553 @ 4500 (LS3)* 395 / 535 @ 4500 (L99)
Recommended fuel – premium unleaded
Max engine speed (rpm)– 6000 (L99) 6600 (LS3)
Fuel economy (auto trans) – 23 hwy (est)

Transmissions
Hydra-Matic 6l50 six-speed automatic (LS, LT) w/ TAPshift
Gear ratios (:1):
First: 4.07
Second: 2.37
Third: 1.55
Fourth: 1.16
Fifth: 0.85
Sixth: 0.67
Reverse: 3.06
Final drive ratio: 3.27

Hydra-Matic 6l80 six-speed automatic (SS) w/ TAPshift
Gear ratios (:1):
First: 4.03
Second: 2.36
Third: 1.53
Fourth: 1.15
Fifth: 0.85
Sixth: 0.67
Reverse: 3.06
Final drive ratio: 3.27

Aisin Warner AY6 six-speed manual (LS, LT)
Gear ratios (:1):
First: 4.48
Second: 2.58
Third: 1.63
Fourth: 1.19
Fifth: 1.00
Sixth: 0.75
Reverse: 3.67
Final drive ratio: 3.27

TR6060 six-speed manual (SS)
Gear ratios (:1):
First: 3.01
Second: 2.07
Third: 1.43
Fourth: 1.00
Fifth: 0.84
Sixth: 0.57
Reverse: 3.28
Final drive ratio: 3.45

Dimensions, Exterior:
Overall length (in/mm): 190.4/4836
Overall width (in/mm): 75.5/1918
Overall height (in/mm): 54.2/1377
Track, front (in/mm): 63.7/1618
Track, rear (in/mm): 64.1/1628 (LS, LT); 63.7/1618 (SS)
Curb weights (lb/kg):
3750/1705 - LT w/automatic
3741/1700 - LT w/manual
3769/1713 - LS w/automatic
3780/1718 - LS w/manual
3913/1779 - SS w/automatic
3860/1755 - SS w/manual
Weight balance (% front/rear) 52/48

Dimensions, Interior:
Seating capacity (front/rear): 2/2
Headroom (in/mm): front: 37.4/950; rear: 35.3/897
Legroom (in/mm): front: 42.4/1077; rear: 29.9/757
Shoulder room (in/mm): front: 56.9/1444; rear: 42.5/1080

Capacities:
Cargo volume (cu ft/L): 11.3/320
Fuel tank (gal/L): 19/71.9 Engine oil (qt/L): 3.6L: 7.6/7.2; 6.2L: 8.9/8.5








Its a overweight pig but we got the camaro back

[Memphis]

[tyle1780]

they did an amazing job on the interior to make it resemble the classic models imo

[JoseCR7]

damn those headlights are mean as hell
nice post Memphis
X2 on getting the camaro back

[EVILZ33]

interior and wheels look pretty retarded but rest is ok

[bmxer99]

i wish the V6 had more tq, i would be interested in that for a DD'er. with a 6spd Manual makin 30mpg. that would be badass..

Say it made 300RWHP, and 270RWTQ that would be a overall good car, lol would beat V8 Mustangs easily.

I will wait a few years to even consider buying one, due to the fact that cooler shit and fixes come out the second and third year.

then again id be known as V6 bmxer again

[bmxer99]

ZL1 Camaro anyone?

also i would have to change out the black grill, and find billet or chrome..

[Memphis]

Noww that would be funny if the V6 one would outrun GTs lol

[bmxer99]

dont wait for too long, bolt ons??? some headers membe???!?!?! and CAI and a tune would wake it up

rear seat delete too, spare tire delete.


no Ttops on this one

[Memphis]

good those are for homos

[JoseCR7]

cover it in cf ahahahahah

[01mmmz28]

with the way the GM has always underrated their performance cars, I bet that V6 will outrun the current GT stang and that 422hp on the V8 is a tad conservative as well I bet. Bet it will dyno at 400.

[bmxer99]

id like to see both on a dyno.

[97talon]

Originally Posted by Memphis

Competitors: Dodge Challenger, Ford Mustang, Nissan 350Z

She's a fat bastard but very nice.

[HKSevo]

looks like we are getting the chrome insert around the tail lights


v6 one is gonna make 300rwhp???damnn