Tremek Car Video Forum

BTT · 17 Oct 2006, 11:57 am

BMW E30 with M3 3.0 motor. The dynopull was done on a dyno that has been compared many times against a enginedyno, and the results has been very close each time, people tell. 1200 hp should be an easy match says the owner.

999rwhp - 1047nm on wheels = 1129hp - 1183nm@2,5 bar

vid: http://www.youtube.com/watch?v=TJr0fxZE50w

///M3 · 19 Oct 2006, 03:50 am

///m-poweeeeeeeeeeeeerrrrrrrrrrrrrr

Alfista · 26 Oct 2006, 09:28 am

Nice to se that he finaly did it

He was aiming for 1000 bhp for quite some time now...

Darkness · 27 Oct 2006, 07:50 pm

There's something wrong in that dyno graph!!! Horsepower and torque curves always cross themselves at 5252rpms.

As we all know horsepower = rpm x torque / 5252 and Torque = 5252 x horsepower / rpm

Hence, the HP and TQ lines always cross at 5252rpms. Therefore, this dyno is either a photoshop or the pull was done in a different gear than the one input in the system.

Super nice car though.

17 Oct 2006, 11:57 am	#1 (permalink)
BTT Regular Tremekian Join Date: May 2006 Posts: 177 BTT's Gallery	BMW E30 turbo with 1129 BHP BMW E30 with M3 3.0 motor. The dynopull was done on a dyno that has been compared many times against a enginedyno, and the results has been very close each time, people tell. 1200 hp should be an easy match says the owner. 999rwhp - 1047nm on wheels = 1129hp - 1183nm@2,5 bar vid: http://www.youtube.com/watch?v=TJr0fxZE50w __________________ Worlds fastest / quickest BMWs http://www.powerfulcars.net/bmw-qm.html

19 Oct 2006, 03:50 am	#2 (permalink)
///M3 Regular Tremekian Join Date: Jun 2004 Posts: 105 ///M3's Gallery	///m-poweeeeeeeeeeeeerrrrrrrrrrrrrr __________________ The french forum for ///M Driver www.motorsport-power.com

26 Oct 2006, 09:28 am	#3 (permalink)
Alfista Cool Tremekian Join Date: Jun 2004 Location: Sweden Posts: 215 Alfista's Gallery	Nice to se that he finaly did it He was aiming for 1000 bhp for quite some time now... __________________ Well I drive alfa romeos...

27 Oct 2006, 07:50 pm	#4 (permalink)
Darkness Fanatic Tremekian Join Date: Apr 2004 Location: Boston/Portugal Posts: 711 Darkness's Gallery	There's something wrong in that dyno graph!!! Horsepower and torque curves always cross themselves at 5252rpms. As we all know horsepower = rpm x torque / 5252 and Torque = 5252 x horsepower / rpm Hence, the HP and TQ lines always cross at 5252rpms. Therefore, this dyno is either a photoshop or the pull was done in a different gear than the one input in the system. Super nice car though. __________________ Rally RSX Type-s Production 2wd - United States Rally Championship Last edited by Darkness; 27 Oct 2006 at 07:52 pm.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)