View Single Post
Old 20 Jan 2008, 07:29 am   #6 (permalink)
01mmmz28
Veteran Tremekian
 
01mmmz28's Avatar
 
Join Date: Dec 2005
Location: On a national search to find burgh a dentist that will work on baboon teeth.
Posts: 4,744
Default Re: stupid question about stages

I was watching some sport compact tuner show a long time ago, not sure if I am correct, but here goes:

The Stage 1 Turbo Kit for the SRT-4 boosts power to 240hp and 260 ft-lbs. of torque. Components Stage 1 PCM (4) 577 cc/min fuel injectors Calibration Features Increased WOT and part throttle boost Improved turbo response Boost hold feature during WOT shifts Enchanced 1st gear boost schedule for a high-performance launch More aggressive exhaust note during deceleration Optimized calibration for the Mopar Performance Blow-Off Valve Conversion Kit

stg2
The Stage 2 Turbo Kit for the SRT-4 give you a power boost of 265 hp and 280 ft-lbs. oftorque on premium pump gas. For SRT-4, you can also achieve 280 hp and 300 ft-lbs. of torque on 100+ octane unleaded racing fuel. For additional power and a more aggressive exhaust note, you can add a new Cat-Back Exhaust Systems. .Stage 2 PCM Turbo Toys - Turbo Intercooler Sprayer - High Octane Fuel Switch - Dial-A-Boost "Down" Switch, (4) 682 cc/min fuel injectors Wastegate actuator 3.0 Bar MAP sensor 3.0 Bar TIP sensor

stg3

all of stg1 and stg2, plus a larger turbo, capable of 450+ hp.
__________________
2001 Z/28 LS1. Texas speed cam 231/237 598/595 112 lsa, .660 lift springs,7.4 hardened pushrods, lid, LT headers,TSP X pipe,Texas speed "true duels",Richmond 4.10 gears, stud kit, Thunder racing girdle cover, Spec stg 3+ clutch, ARP rod bolts, clevite main and rod bearings, 25% underdrive pulley, SLP 85mm MAF,black ZR1 rims 315/35/17 Nitto DR's, BMR subframes, BMR LCA's, Edelbrock TQ Arm, BMR pan hard bar. Tuned by R.P.M. Performance. All labor done my ME !!!!
01mmmz28 is offline   Reply With Quote